LS10 Installation and Operating Guide Page 71
LS10 Installation & Operating Guide Document # 9301H66300 Ver. 1.01
Table 17. Network Diagnostics
Field Description
Ping Test
Tests whether the remote network device can be accessed
through the network.
Dest: <SelectAddr>
Selects the remote computer or IP address for the ping test.
Open the dropdown and select:
Gateway
DNS Server
NTP Server
Log Server
Datasat
Click on the text box to enter or change an IP address. Then a
virtual keyboard screen opens, where you enter the IP address.
Log Net Stats
Enable this to include additional network events in the log to
troubleshoot a network problem. This option is always disabled
after a power cycle.
Phy Interface Physical interface
Rx Monitors Receive activity.
Tx Monitors Transmit activity.
DHCP DHCP address
3.18.1 Is there an Internet Connection?
Some local area networks (LANs) have a connection to the Internet, some do not. In order to update the
LS10 from the Datasat server, there must be an Internet connection. To test this, select Net Diag and
use the Ping Test utility. Select the destination Datasat in the Dest: box. Press Ping Test, and verify
the reply is ‘OK’.
To Next Page
Loading...