LS10 Installation and Operating Guide Page 68
LS10 Installation & Operating Guide Document # 9301H66300 Ver. 1.01
Version, Serial Number, and MAC address
• The upper left portion displays software version and build date, unit serial number, MAC
address,and the Auro Engine version (if applicable).
System Monitor
• The upper right portion displays the internal circuit board temperatures.
• The lower portion on the first screen displays board information such as board ID, Address,
hardware revision level, loader version, loader check-sum, firmware version, and firmware
check-sum.
• Tap the lower portion of the screen to view the second info screen, which displays the
expected and actual bus voltages for each board. It is normal for the actual level to vary
slightly from the expected. The background color for the expected and actual values will turn
red should the actual voltage be out of the acceptable range.
3.16 Notices
The Notices screen identifies open source software packages that were used in the system. The screen
can be scrolled to view open source software packages used, along with the version number and license
agreements.
Figure 49.Notices Screen
To Next Page
Loading...