Datasat LS10 - Page 5

LS10 Installation and Operating Guide Page 5
LS10 Installation & Operating Guide Document # 9301H66300 Ver. 1.01
2.4
Power Supply 35
2.4.1 Changing the Input Voltage Setting and Fuses 35
2.5 Mounting and Connection 36
2.5.1 Rack/Enclosure Requirements 37
2.5.2 Rack Mount Installation 37
2.5.3 Installing/Removing Feet 38
3.0 LS10 CONFIGURATION AND SETUP 38
3.1 How-To Procedures for Setup 38
3.2 Using VNC to Access Setup Menus 39
3.3 Setup Home Screen 40
3.4 Input 41
3.5 Audio Levels 43
3.6 EQ 46
3.6.1 EQ1/EQ2 46
3.6.2 Parametric EQ 46
3.6.3 EQ Copy or Clear 47
3.7 Delays 49
3.8 Decoder 50
3.8.1 Decoder Sources 50
3.8.2 Post-Processing 51
3.9 Bass Management Setup 52
3.9.1 Speaker Options Configuration Screen 53
3.9.2 Bass Management Setup Procedure 56
3.10 System Setup 60
3.11 Update LS10 Software 62
3.11.1 Update System Software from Network 62
3.11.2 Update System Software from USB Device 63
3.12 HDMI Status and Firmware Update 64
3.13 USB Save/Restore 65
3.13.1 Saving and Restoring Configuration Files 66
3.14 LogFile 66
3.15 Info 67
3.16 Notices 68
3.17 Network 69
3.18 Network Diagnostics 70
3.18.1 Is there an Internet Connection? 71
3.19 Access Control 72
3.20 Automation Macros 73
3.20.1 Add Macro 74
3.20.2 Delete Macro 74
3.20.3 Copy Macro 74
3.21 Automation Events 74
3.21.1 Add New Event 75
3.21.2 Delete Event 76
3.21.3 Edit Event 77
3.22 Automation Serial Setup 77
3.23 HDMI Outputs to Different Devices 77