LS10 Installation and Operating Guide Version 1.01
Appendix B: LS10 Product Specifications B-2 Document #: 9301H66300 Ver. 1.01
Signal Outputs
Analog Audio Outputs:
Channels: 15
Balanced (can be connected unbalanced or single ended)
Connectors: 15 XLR
Level: 300mV with volume at -15dB, +26dBu max (balanced)
Audio EQ
Parametric
10-band parametric EQ
Adjustable from 20Hz to 20kHz, gain+/-6dB in 0.1dB steps
Q range from 0.7 to 5
Bass Management
Full or adjustable high pass settings for screen and surround speakers
Support for 0 to 2 subwoofers
Audio Delays
Individual Channel Delays:
0 - 100ms
Global Delay:
0 –1000ms
Management
Remote Control
RS232 DB9
Network control using TCP/IP
VNC control including by iOS and Android devices
IR Remote
Power Requirements
105-130 VAC or 215-260 VAC, 50-60Hz. Input voltage range is manually switched at the
rear panel by rotating the fuse holder.
Power consumption: 45W
To Next Page
Loading...