EasyManua.ls Logo

Datasat LS10 - Page 92

Datasat LS10
118 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
LS10 Installation and Operating Guide Version 1.01
Appendix C: Speaker Configurations C-3 Document #: 9301H66300 Ver. 1.01
11.1
DTS Neo:X also supports the addition of Left Wide and Right Wide speakers, for a total of 11.1 channels. The
wide speakers should be at the same height as the 7.1 base configuration, 60 degrees wide of the center
channel.
A note on subwoofer placement:
The use of subwoofers for home theatre is highly recommended, both to accurately reproduce the LFE
channel and also to bass manage the other channels in the event that some or all of the speakers are not full-
range. The number and placement of subwoofers can greatly affect bass response and even distribution of
bass across listening positions. Every home theatre has different requirements, but Datasat recommends as a
general guideline the use of 2 or even 4 subwoofers to provide accurate, even bass response.

Table of Contents