DEEP SEA ELECTRONICS DSEGenset DSE3110 User Manual

DSE3110 Operator Manual
057-086 ISSUE: 6
Page 2 of 56
Deep Sea Electronics Ltd.
Highfield House
Hunmanby
North Yorkshire
YO14 0PH
England
Sales Tel: +44 (0) 1723 890099
E-mail: sales@deepseaelectronics.com
Website: www.deepseaelectronics.com
DSE3110 Operator Manual
© Deep Sea Electronics Ltd.
All rights reserved. No part of this publication may be reproduced in any material form (including
photocopying or storing in any medium by electronic means or other) without the written permission of
the copyright holder except in accordance with the provisions of the Copyright, Designs and Patents
Act 1988.
Applications for the copyright holder’s written permission to reproduce any part of this publication
must be addressed to Deep Sea Electronics Ltd. at the address above.
The DSE logo and the names DSEGenset
®
, DSEATS
®
, DSEPower
®
and DSEControl
®
are UK
registered trademarks of Deep Sea Electronics Ltd.
Any reference to trademarked product names used within this publication is owned by their respective
companies.
Deep Sea Electronics Ltd. reserves the right to change the contents of this document without prior
notice.
Amendments Since Last Publication
Issue
Comments
2
Update to Typical wiring diagram and Power supply requirements
2.1
Corrected part numbers for ordering spare connectors.
2.2
Removal of incorrect inclusion of Clock/Scheduler function – not available in 3000
series.
3
Addition of phase to phase voltage, AC systems and oil pressure as PSI
5
Changes to input wetting current and current consumption of supply.
6
Updated style of document
Typeface: The typeface used in this document is Arial. Care must be taken not to mistake the upper case letter I with the numeral 1. The numeral
1 has a top serif to avoid this confusion.

DEEP SEA ELECTRONICS DSEGenset DSE3110 Specifications

General

Brand	DEEP SEA ELECTRONICS
Model	DSEGenset DSE3110
Category	Control Unit
Language	English