Open Shortest Path First (OSPFv2 and OSPFv3) | 1025
After the reply is received and the new key is authenticated, you must delete the old key. Dell Force10
recommends keeping only one key per interface.
ip ospf mtu-ignore
c e s
Disable OSPF MTU mismatch detection upon receipt of database description (DBD) packets.
Syntax
ip ospf mtu-ignore
To return to the default, enter no ip ospf mtu-ignore.
Defaults
Enabled
Command Modes
INTERFACE
Command
History
ip ospf network
c e s
Set the network type for the interface.
Syntax
ip ospf network {broadcast | point-to-point}
To return to the default, enter no ip ospf network.
Parameters
Defaults
Not configured.
Command Modes
ROUTER OSPF
Command
History
Note: The MD5 secret is stored as plain text in the configuration file with service password
encryption.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.1.1.1 Introduced on E-Series
broadcast Enter the keyword broadcast to designate the interface as part of a broadcast
network.
point-to-point Enter the keyword point-to-point to designate the interface as part of a
point-to-point network.
Version 7.8.1.0 Introduced support for Multi-Process OSPF.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.1.1.1 Introduced on E-Series
To Next Page
Loading...
