Dell Force10 TeraScale E Series - Multicast; Overview; IPv4 Multicast Commands

Multicast | 953
35
Multicast
Overview
The platforms on which a command is supported is indicated by the character — e for the E-Series,
c for the C-Series, and s for the S-Series — that appears below each command heading.
This chapter contains the following sections:
• IPv4 Multicast Commands
• IPv6 Multicast Commands
IPv4 Multicast Commands
The IPv4 Multicast commands are:
• clear ip mroute
• clear ip mroute snooping
• ip mroute
• ip multicast-lag-hashing
• ip multicast-mode l2
• ip multicast-routing
• ip multicast-limit
• mac-address-table static
• mac-flood-list
• mtrace
• queue backplane multicast
• restrict-flooding
• show ip mroute
• show ip rpf
• show mac-address-table static multicast
• show queue backplane multicast