Multicast | 969
show queue backplane multicast
e
Display the backplane bandwidth configuration about how much bandwidth is dedicated to multicast
versus unicast.
Syntax
show queue backplane multicast bandwidth-percentage
Defaults
None
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 35-8. show queue backplane multicast Command Example
Related
Commands
Version 7.7.1.0 Introduced on E-Series
FTOS#show queue backplane multicast bandwidth-percent
Configured multicast bandwidth percentage is 80
queue backplane
multicast
Reallocate the amount of bandwidth dedicated to multicast traffic.
To Next Page
Loading...
