Dell Force10 TeraScale E Series - FTOS Service Agent; Overview; Commands

FTOS Service Agent | 493
19
FTOS Service Agent
Overview
The FTOS Service Agent (FTSA), commonly called a call-home service, collects information from the
chassis manager, constructs email messages, and sends the messages to the recipients that you
configure.
For details on the use of FTSA commands and the structure of FTSA messages, see the Service Agent
(FTSA) chapter in the FTOS Configuration Guide.
All commands in this chapter are supported on C-Series and the E-Series using TeraScale cards. All
commands except for three — encrypt, keyadd, and show keys — are supported on E-Series using
EtherScale cards. Platform support is indicated by the characters that appear below each command
heading —
c for C-Series, e for E-Series.
Commands
The FTSA commands are:
• action-list
• admin-email
• call-home
• case-number
• schedule
• seq cli-action
• seq cli-debug
• seq cli-show
• contact-address
• contact-email
• contact-name
• contact-notes
• contact-phone
• dampen
• debug call-home
• default-action
• default-test
• description
• domain-name
• enable