Dell Force10 TeraScale E Series - Dynamic Host Configuration Protocol (DHCP); Overview; Commands to Configure the System to be a DHCP Server

Dynamic Host Configuration Protocol (DHCP) | 457
15
Dynamic Host Configuration Protocol (DHCP)
Overview
Dynamic Host Configuration Protocol (DHCP) is an application layer protocol that dynamically
assigns IP addresses and other configuration parameters to network end-stations (hosts) based on
configuration policies determined by network administrators.
• Commands to Configure the System to be a DHCP Server
• Commands to Configure Secure DHCP
Commands to Configure the System to be a DHCP Server
• clear ip dhcp
• client-identifier
• debug ip dhcp server
• default-router
• disable
• dns-server
• domain-name
• excluded-address
• hardware-address
• host
• ip dhcp bootp
• ip dhcp relay information
• disable
• lease
• netbios-name-server
• netbios-node-type
• network
• pool
• show ip dhcp binding
• show ip dhcp configuration
• show ip dhcp conflict
• show ip dhcp database
• show ip dhcp server