Dell Force10 TeraScale E Series - Page 462

462 | Dynamic Host Configuration Protocol (DHCP)
www.dell.com | support.dell.com
Command Mode
Default
Command
History
lease
c s
Specify a lease time for the addresses in a pool.
Syntax
lease {days [hours] [minutes] | infinite}
Parameters
Command Mode
DHCP <POOL>
Default
24 hours
Command
History
netbios-name-server
c s
Specify the NetBIOS Windows Internet Naming Service (WINS) name servers, in order of preference,
that are available to Microsoft Dynamic Host Configuration Protocol (DHCP) clients.
Syntax
netbios-name-server address [address2...address8]
Parameters
Command Mode
DHCP <POOL>
Default
None
Command
History
option
policy
Version 8.2.1.0 Introduced on C-Series and S-Series.
days
Enter the number of days of the lease.
Range: 0-31
hours
Enter the number of hours of the lease.
Range: 0-23
minutes
Enter the number of minutes of the lease.
Range: 0-59
infinite
Specify that the lease never expires.
Version 8.2.1.0 Introduced on C-Series and S-Series.
address
Enter the address of the NETBIOS name server. You may enter up to 8, in order of
preference.
Version 8.2.1.0 Introduced on C-Series and S-Series.