Dell Force10 TeraScale E Series - Uplink Failure Detection (UFD); Overview; Commands

Uplink Failure Detection (UFD) | 1445
60
Uplink Failure Detection (UFD)
Overview
Uplink Failure Detection (UFD) provides detection of the loss of upstream connectivity and, if used
with NIC teaming, automatic recovery from a failed link.
Uplink Failure Detection is supported on platform: s (S50 only).
Commands
• clear ufd-disable
• debug uplink-state-group
• description
• downstream
• downstream auto-recover
• downstream disable links
• enable
• show running-config uplink-state-group
• show uplink-state-group
• uplink-state-group
• upstream