Dell Force10 TeraScale E Series - 802.1 ag; Overview; Commands

802.1ag | 165
6
802.1ag
Overview
802.1ag is available only on platform: s
Commands
This chapter contains the following commands:
• ccm disable
• ccm transmit-interval
• clear ethernet cfm traceroute-cache
• database hold-time
• disable
• domain
• ethernet cfm
• ethernet cfm mep
• ethernet cfm mip
• mep cross-check
• mep cross-check enable
• mep cross-check start-delay
• ping ethernet
• show ethernet cfm domain
• show ethernet cfm maintenance-points local
• show ethernet cfm maintenance-points remote
• show ethernet cfm mipbd
• show ethernet cfm statistics
• show ethernet cfm port-statistics
• show ethernet cfm traceroute-cache
• service
• traceroute cache hold-time
• traceroute cache size
• traceroute ethernet