Dell Force10 TeraScale E Series - Page 172

172 | 802.1ag
www.dell.com | support.dell.com
Defaults
None
Command Modes
EXEC Privilege
Command
History
Example
FTOS#show ethernet cfm maintenance-points remote detail
MAC Address: 00:01:e8:58:68:78
Domain Name: cfm0
MA Name: test0
Level: 7
VLAN: 10
MP ID: 900
Sender Chassis ID: FTOS
MEP Interface status: Up
MEP Port status: Forwarding
Receive RDI: FALSE
MP Status: Active
show ethernet cfm mipbd
s
Display the MIP Database.
Syntax
show ethernet cfm mipdb
Defaults
None
Command Modes
EXEC Privilege
Command
History
show ethernet cfm statistics
s
Display MEP statistics.
Syntax
show ethernet cfm statistics [domain {name | level} vlan-id vlan-id mpid mpid]
Parameters
Defaults
None
expired
Enter this keyword to view MEP entries that have expired due to
connectivity failure.
waiting
Enter this keyword to display MEP entries waiting for response.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on S-Series
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on S-Series
domain
Enter this keyword to display statistics for a particular domain.
name | level
Enter the domain name or level.
vlan-id vlan-id
Enter this keyword followed by a VLAN ID.
mpid mpid
Enter this keyword followed by a maintenance point ID.