Dell Force10 TeraScale E Series - MLD Snooping Commands

922 | Multicast Listener Discovery (MLD)
www.dell.com | support.dell.com
MLD Snooping Commands
The MLD Snooping commands are:
• ipv6 mld snooping enable
• ipv6 mld snooping flood
• ipv6 mld snooping
• ipv6 mld snooping explicit-tracking
• ipv6 mld snooping mrouter
• ipv6 mld snooping querier
• show ipv6 mld snooping groups
• show ipv6 mld snooping mrouter
ipv6 mld snooping enable
e
Enable MLD Snooping globally.
Syntax
ipv6 mld snooping enable
Defaults
Disabled
Command Modes
CONFIGURATION (conf)
Command
History
ipv6 mld snooping flood
e
Enable MLD Snooping Flood globally.
Syntax
ipv6 mld snooping flood
To disable, use the no ipv6 mld snooping flood command.
Defaults
Enabled
Command Modes
CONFIGURATION (conf)
Usage
Information
When flooding is enabled, unregistered multicast data is flooded on the VLAN.
When flooding is disabled, unregistered multicast data is forwarded only to mrouter ports on the
VLAN.
Command
History
Version 7.4.1.0 Introduced
Version 7.4.1.0 Introduced