Dell Force10 TeraScale E Series - Multicast Listener Discovery (MLD); Overview; MLD Commands

Multicast Listener Discovery (MLD) | 915
32
Multicast Listener Discovery (MLD)
Overview
The platforms on which a command is supported is indicated by the character — e for the E-Series,
c for the C-Series, and s for the S-Series — that appears below each command heading.
This chapter contains the following sections:
• MLD Commands
• MLD Snooping Commands
MLD Commands
The MLD commands are:
• clear ipv6 mld groups
• debug ipv6 mld
• ipv6 mld explicit-tracking
• ipv6 mld last-member-query-interval
• ipv6 mld querier-timeout
• ipv6 mld query-interval
• ipv6 mld query-max-resp-time
• ipv6 mld static-group
• ipv6 mld version
• show ipv6 mld interface
clear ipv6 mld groups
e
Clear entries from the group cache table.
Syntax
clear ipv6 mld groups [interface | group-address]