Dell Force10 TeraScale E Series - Spanning Tree Protocol (STP); Overview; Commands

Spanning Tree Protocol (STP) | 1417
58
Spanning Tree Protocol (STP)
Overview
The commands in this chapter configure and monitor the IEEE 802.1d Spanning Tree protocol (STP)
and are supported on all three Dell Force10 switch/routing platforms, as indicated by the c, e, and
s characters under the command headings:
Commands
• bpdu-destination-mac-address
• bridge-priority
• debug spanning-tree
• description
• disable
• forward-delay
• hello-time
• max-age
• protocol spanning-tree
• show config
• show spanning-tree 0
• spanning-tree 0