Dell Force10 TeraScale E Series - Page 175

802.1ag | 175
Command
History
traceroute cache size
s
Set the size of the Link Trace Cache.
Syntax
traceroute cache size entries
Parameters
Defaults
100 entries
Command Modes
ETHERNET CFM
Command
History
traceroute ethernet
s
Send a Linktrace message to an MEP.
Syntax
traceroute ethernet domain
[name | level] ma-name ma-name remote {mep-id mep-id | mac-addr
mac-address
}
Parameters
Defaults
None
Command Modes
EXEC Privilege
Command
History
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on S-Series
entries
Enter the number of entries the Link Trace Cache can hold.
Range: 1 - 4095 entries
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on S-Series
domain name |
level
Enter the keyword followed by the domain name or level.
ma-name ma-name
Enter the keyword followed by the maintenance association name.
mepid mep-id
Enter the MEP ID that will be the trace target.
mac-addr
mac-address
Enter the MAC address of the trace target.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on S-Series