Dell Force10 TeraScale E Series - Page 166

166 | 802.1ag
www.dell.com | support.dell.com
ccm disable
s
Disable CCM.
Syntax
ccm disable
Enter no ccm disable to enable CCM.
Defaults
Disabled
Command Modes
ECFM DOMAIN
Command
History
ccm transmit-interval
s
Configure the transmit interval (mandatory). The interval specified applies to all MEPs in the domain.
Syntax
ccm transmit-interval seconds
Parameters
Defaults
10 seconds
Command Modes
ECFM DOMAIN
Command
History
clear ethernet cfm traceroute-cache
s
Delete all Link Trace Cache entries.
Syntax clear ethernet cfm traceroute-cache
Defaults
None
Command Modes
EXEC Privilege
Command
History
database hold-time
s
Set the amount of time that data from a missing MEP is kept in the Continuity Check Database.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on S-Series
seconds
Enter a transmit interval.
Range: 1,10,60,600
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on S-Series
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on S-Series