498 | FTOS Service Agent
www.dell.com | support.dell.com
seq cli-action
c e
Configure an action to execute an FTOS command for one-time operation, triggered as part of the
selected action list.
Syntax
seq number cli-action command
Parameters
Defaults
None
Command Modes
CALL-HOME ACTION-LIST
Command
History
Related
Commands
seq cli-debug
c e
Configure an action to collect debug information using the designated debug command for the
designated time interval.
Syntax
seq number cli-debug command time seconds
Parameters
Defaults
None
Command Modes
CALL-HOME ACTION-LIST
Command
History
Usage
When you enter a debug command, do not repeat the initial debug keyword. For example, if the
command is debug cpu-traffic-stats, enter cli-debug cpu-traffic-stats.
seq number Use the keyword seq followed by a number that FTOS uses to execute the list of
actions in numerical order.
command
Enter a mode command.
Version 8.2.1.0
Keyword
cli-command changed to cli-action. All options removed. Added
keywork
seq.
Version 7.8.1.0 Introduced on C-Series and E-Series
action-list Specify an action list for the associated policy and enter the
conf-call-home-actionlist-name mode.
seq number Use the keyword seq followed by a number that FTOS uses to execute
the list of actions in numerical order.
cli-debug debug-command Enter a debug command, but without the initial debug keyword. If the
debug command has spaces, wrap the command in quotes.
Range: 1-100((max 100 chars including quotes)
time seconds Enter the keyword time, followed by the duration, in seconds, that the
debug operation should operate.
Range: 1–600 (number of seconds that the operation should operate)
Version 8.2.1.0
Added keyword
seq.
Version 7.8.1.0 Introduced on C-Series and E-Series
To Next Page
Loading...
