Dell Force10 TeraScale E Series - Page 501

FTOS Service Agent | 501
contact-notes
c e
Enter comments (up to 100 characters) to be included in the configuration database and in type 5 FTSA
messages.
Syntax
contact-notes string
Defaults
none
Command Modes
CALL-HOME
Command
History
Related
Commands
contact-phone
c e
Enter a customer phone number (up to 50 characters) to be included in type-5 FTSA messages.
Syntax
contact-phone number
Defaults
none
Command Modes
CALL-HOME
Command
History
Related
Commands
dampen
c e
Set a delay before sampling for a test condition again after it has been matched.
Syntax
dampen number
Parameters
Defaults
5 minutes
Command Modes
CALL-HOME POLICY
Command
History
Related
Commands
Version 7.7.1.0 Introduced on C-Series and E-Series
call-home Start FTSA and enter CONFIGURATION (conf-callhome) mode.
Version 7.7.1.0 Introduced on C-Series and E-Series
call-home Start FTSA and enter CONFIGURATION (conf-callhome) mode.
number
Enter the number of minutes for FTSA to wait before sampling a test condition again after it
has been matched.
Range: 1–1440
Version 7.8.1.0 Introduced on C-Series and E-Series
policy Create a policy with a name and enter config-callhome-policy-name mode.