EasyManua.ls Logo

Dell Force10 TeraScale E Series - Page 967

Dell Force10 TeraScale E Series
1640 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Multicast | 967
show mac-address-table static multicast
c
Display information on the current configuration of Layer 2 multicast switching on a router.
Syntax
show mac-address-table static multicast [multicast-mac-address [vlan vlan-id] | vlan
vlan-id | count [vlan vlan-id]]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Usage
Information
Use the show mac-address-table static multicast command to display the currently configured static
multicast MAC addresses, associated VLAN, and assigned output ports used to switch Layer 2
multicast traffic on a router.
Example
Figure 35-6. show mac-address-table static multicast Command Output
multicast-mac-address
[vlan vlan-id]
Enter the static multicast MAC address in nn:nn:nn:nn:nn:nn format and
(optionally) the VLAN ID of a VLAN used to switch Layer 2 multicast
traffic on the router. VLAN ID range: 1 to 4094.
vlan vlan-id
Enter the VLAN ID of a VLAN used to switch Layer 2 multicast traffic on
the router. VLAN ID range: 1 to 4094.
count [vlan vlan-id]
Enter the keyword count and (optionally) the VLAN ID of a VLAN used to
switch Layer 2 multicast traffic to display the number of static multicast
MAC addresses in use for all or a specified VLAN.
Version 8.4.2.5 Introduced on C-Series.
Table 35-2. show mac-address-table static multicast Information
Column Heading Description
VlanId Displays the VLAN ID number of the VLAN used for Layer 2 multicast forwarding.
Mac Address Displays the static MAC address in nn:nn:nn:nn:nn:nn format that is configured for
Layer 2 multicast forwarding.
Type Displays static for a manually configured MAC address.
State Displays whether the multicast MAC address is in use (Active) or not in use (Inactive).
The state of a multicast MAC address is inactive if an associated VLAN has not been
configured.
FTOS# show mac-address-table static multicast
VlanId Mac Address Type State L2MCIndex Interfaces
10 01:00:5e:01:01:01 static Active 0 Gi 1/2,
Gi 2/47
11 01:00:5e:01:01:02 static Active 1 Po 10
12 01:00:5e:01:01:01 static Inactive 0

Table of Contents

Related product manuals