Dell Force10 TeraScale E Series - Page 1112

1112 | PIM-Sparse Mode (PIM-SM)
www.dell.com | support.dell.com
show ip pim rp
c e s
View all multicast groups-to-RP mappings.
Syntax
show ip pim rp [mapping | group-address]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Example 1
Figure 41-5. show ip pim rp mapping Command Example 1
Example 2
Figure 41-6. show ip pim rp mapping Command Example 2
Ver Displays the PIM version number.
• v2 = PIM version 2
DR prio/Mode Displays the Designated Router priority and the mode.
• 1 = default Designated Router priority (use ip pim dr-priority)
• DR = Designated Router
• S = Sparse mode
Table 41-2. show ip pim neighbor Command Example Fields
Field Description
mapping (OPTIONAL) Enter the keyword mapping to display the multicast
groups-to-RP mapping and information on how RP is learnt.
group-address
(OPTIONAL) Enter the multicast group address mask in dotted decimal
format to view RP for a specific group.
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.8.1.0 Introduced on S-Series
FTOS#sh ip pim rp
Group RP
224.2.197.115 165.87.20.4
224.2.217.146 165.87.20.4
224.3.3.3 165.87.20.4
225.1.2.1 165.87.20.4
225.1.2.2 165.87.20.4
229.1.2.1 165.87.20.4
229.1.2.2 165.87.20.4
FTOS#
FTOS#sh ip pim rp mapping
Group(s): 224.0.0.0/4
RP: 165.87.20.4, v2
Info source: 165.87.20.5, via bootstrap, priority 0
Uptime: 00:03:11, expires: 00:02:46
RP: 165.87.20.3, v2
Info source: 165.87.20.5, via bootstrap, priority 0
Uptime: 00:03:11, expires: 00:03:03
FTOS#