Dell Force10 TeraScale E Series - Page 1176

1176 | Per-VLAN Spanning Tree plus (PVST+)
www.dell.com | support.dell.com
vlan forward-delay
c e s
Set the amount of time the interface waits in the Listening State and the Learning State before
transitioning to the Forwarding State.
Syntax
vlan vlan-range forward-delay seconds
To return to the default setting, enter no vlan forward-delay command.
Parameters
Defaults
15 seconds
Command Modes
CONFIGURATION (conf-pvst)
Command
History
Related
Commands
vlan vlan-range Enter the keyword vlan followed by the VLAN number(s).
Range: 1 to 4094
forward-delay
seconds
Enter the keyword forward-delay followed by the time interval, in seconds, that
FTOS waits before transitioning PVST+ to the forwarding state.
Range: 4 to 30 seconds
Default: 15 seconds
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
Version 6.2.1.1 Introduced
vlan bridge-priority Set the bridge-priority value
vlan hello-time Change the time interval between BPDUs
vlan max-age Change the time interval before PVST+ refreshes
show spanning-tree pvst Display the PVST+ configuration