Dell Force10 TeraScale E Series - Page 1186

1186 | Quality of Service (QoS)
www.dell.com | support.dell.com
Command Mode
EXEC
EXEC Privilege
Command
History
Example
Figure 47-1. show interfaces rate limit Command Example
pre-Version 6.1.1.1 Introduced on E-Series
Table 47-2. show interfaces Command Example Fields
Field Description
Rate limit Committed rate (Mbs) and burst size (KB) of the committed rate
peak Peak rate (Mbs) and burst size (KB) of the peak rate
Traffic monitor 0 Traffic coming to class 0
Normal Committed rate (Mbs) and burst size (KB) of the committed rate
peak Peak rate (Mbs) and burst size (KB) of the peak rate
Out of profile Yellow Number of packets that have exceeded the configured committed rate
Out of profile Red Number of packets that have exceeded the configured peak rate
Traffic monitor 1 Traffic coming to class 1
Traffic monitor 2 Traffic coming to class 2
Traffic monitor 3 Traffic coming to class 3
Traffic monitor 4 Traffic coming to class 4
Traffic monitor 5 Traffic coming to class 5
Traffic monitor 6 Traffic coming to class 6
Traffic monitor 7 Traffic coming to class 7
Total: yellow Total number of packets that have exceeded the configured committed rate
Total: red Total number of packets that have exceeded the configured peak rate
FTOS#show interfaces gigabitEthernet 1/1 rate limit
Rate limit 300 (50) peak 800 (50)
Traffic Monitor 0: normal 300 (50) peak 800 (50)
Out of profile yellow 23386960 red 320605113
Traffic Monitor 1: normal NA peak NA
Out of profile yellow 0 red 0
Traffic Monitor 2: normal NA peak NA
Out of profile yellow 0 red 0
Traffic Monitor 3: normal NA peak NA
Out of profile yellow 0 red 0
Traffic Monitor 4: normal NA peak NA
Out of profile yellow 0 red 0
Traffic Monitor 5: normal NA peak NA
Out of profile yellow 0 red 0
Traffic Monitor 6: normal NA peak NA
Out of profile yellow 0 red 0
Traffic Monitor 7: normal NA peak NA
Out of profile yellow 0 red 0
Total: yellow 23386960 red 320605113