Dell Force10 TeraScale E Series - Page 1219

Quality of Service (QoS) | 1219
show qos wred-profile
e
View the WRED profile details.
Syntax
show qos wred-profile wred-profile-name
Parameters
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 47-21. show qos wred-profile Command Output
test cam-usage
c e s
Check the Input Policy Map configuration for the CAM usage.
Syntax
test cam-usage service-policy input policy-map linecard {[number port-set portpipe
number] | [all]}
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
Command
History
wred-profile-name
Enter the WRED profile name to view the profile details.
pre-Version 6.1.1.1 Introduced on E-Series
FTOS#show qos wred-profile
Wred-profile-name min-threshold max-threshold
wred_drop 0 0
wred_ge_y 1024 2048
wred_ge_g 2048 4096
wred_teng_y 4096 8192
wred_teng_g 8192 16384
WRED1 2000 7000
policy-map
Enter the policy map name.
linecard number
(OPTIONAL) Enter the keyword linecard followed by the line card
slot number.
port-set portpipe number Enter the keyword port-set followed by the line card’s port pipe
number.
Range: 0 or 1
linecard all (OPTIONAL) Enter the keywords linecard all to indicate all line
cards.
Version 7.6.1.0 Introduced on C-Series and S-Series
Version 7.4.1.0 Introduced on E-Series