Dell Force10 TeraScale E Series - Page 1258

1258 | Remote Monitoring (RMON)
www.dell.com | support.dell.com
Command Modes
EXEC
Command
History
Example
Figure 49-1. show rmon Command Example
show rmon alarms
c e s
Display the contents of the RMON Alarm Table.
Syntax
show rmon alarms [index] [brief]
Parameters
Defaults
No default behavior
Command Modes
EXEC
Command
History
Example 1
Figure 49-2. show rmon alarms index Command Example
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
Version 6.1.1.0 Introduced for E-Series
FTOS# show rmon
RMON status
total memory used 218840 bytes.
ether statistics table: 8 entries, 4608 bytes
ether history table: 8 entries, 6000 bytes
alarm table: 390 entries, 102960 bytes
high-capacity alarm table: 5 entries, 1680 bytes
event table: 500 entries, 206000 bytes
log table: 2 entries, 552 bytes
FTOS#
index
(OPTIONAL) Enter the table index number to display just that entry.
brief (OPTIONAL) Enter the keyword brief to display the RMON Alarm Table
in an easy-to-read format.
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
Version 6.1.1.0 Introduced for E-Series
FTOS#show rmon alarm 1
RMON alarm entry 1
sample Interval: 5
object: 1.3.6.1.2.1.1.3
sample type: absolute value.
value: 255161
alarm type: rising or falling alarm.
rising threshold: 1, RMON event index: 1
falling threshold: 501, RMON event index: 501
alarm owner: 1
alarm status: OK
FTOS#