Dell Force10 TeraScale E Series - Page 1307

Security | 1307
Command Modes
INTERFACE
Command
History
Related
Commands
dot1x port-control
c e s
Enable port control on an interface.
Syntax
dot1x port-control {force-authorized | auto | force-unauthorized}
Parameters
Defaults
No default behavior or values
Command Modes
INTERFACE
Command
History
Usage
Information
The authenticator performs authentication only when port-control is set to auto.
dot1x quiet-period
c e s
Set the number of seconds that the authenticator remains quiet after a failed authentication with a
client.
Syntax
dot1x quiet-period seconds
To disable quiet time, use the no dot1x quiet-time command.
Parameters
Defaults
30 seconds
Command Modes
INTERFACE
Command
History
Version 7.6.1.0 Introduced on C-Series and S-Series
Version 7.4.1.0 Introduced on E-Series
interface range Configure a range of interfaces
force-authorized Enter the keyword force-authorized to forcibly authorize a port.
auto Enter the keyword auto to authorize a port based on the 802.1X operation
result.
force-unauthorized Enter the keyword force-unauthorized to forcibly de-authorize a port.
Version 7.6.1.0 Introduced on C-Series and S-Series
Version 7.4.1.0 Introduced on E-Series
seconds
Enter the number of seconds.
Range: 1 to 65535
Default: 30
Version 7.6.1.0 Introduced on C-Series and S-Series
Version 7.4.1.0 Introduced on E-Series