Dell Force10 TeraScale E Series - Page 1315

Security | 1315
Command Modes
CONFIGURATION
Command
History
Usage
Information
The server-generated key is used for SSHv1 key-exchange.
ip ssh password-authentication
c e s
Enable password authentication for the SSH server.
Syntax
ip ssh password-authentication enable
To disable password-authentication, use the no ip ssh password-authentication enable.
Parameters
Defaults
enabled
Command Modes
CONFIGURATION
Command
History
Usage
Information
With password authentication enabled, users can authenticate using local, RADIUS, or TACACS+
password fallback order as configured.
ip ssh pub-key-file
c e s
Specify the file to be used for host-based authentication.
Syntax
ip ssh pub-key-file {WORD}
Parameters
Defaults
No default behavior or values
Command Modes
CONFIGURATION
Command
History
Version 7.6.1.0 Introduced for S-Series
Version 7.5.1.0 Introduced for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
enable Enter the keyword enable to enable password-authentication for the SSH server.
Version 7.6.1.0 Introduced for S-Series
Version 7.5.1.0 Introduced for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
WORD
Enter the file name for the host-based authentication.
Version 7.6.1.0 Introduced for S-Series
Version 7.5.1.0 Introduced for C-Series
pre-Version 6.1.1.0 Introduced for E-Series