Dell Force10 TeraScale E Series - Page 1468

1468 | Virtual Routing and Forwarding (VRF)
www.dell.com | support.dell.com
cam-profile ipv4-v6-vrf
e
t
(E-Series Terascale only) Set the VRF CAM profile for IPv4 and IPv6.
Syntax
cam-profile ipv4-v6-vrf microcode ipv4-v6-vrf
Command Modes
CONFIGURATION
Command
History
Example
Usage
Information
Reload the systems after entering this command to activate the CAM profile.
Related
Commands
Version 8.2.1.0 Introduced on the E-Series Terascale.
FTOS(conf)#cam-profile ipv4-v6-vrf microcode ipv4-v6-vrf
FTOS(conf)#do reload
FTOS(conf)#do show cam-profile
-- Chassis CAM Profile --
CamSize : 18-Meg
: Current Settings : Next Boot
Profile Name : ipv4-v6-vrf : ipv4-v6-vrf
L2FIB : 32K entries : 32K entries
L2ACL : 3K entries : 3K entries
IPv4FIB : 64K entries : 64K entries
IPv4ACL : 1K entries : 1K entries
IPv4Flow : 12K entries : 12K entries
EgL2ACL : 1K entries : 1K entries
EgIPv4ACL : 11K entries : 11K entries
Reserved : 2K entries : 2K entries
IPv6FIB : 18K entries : 18K entries
IPv6ACL : 4K entries : 4K entries
IPv6Flow : 3K entries : 3K entries
EgIPv6ACL : 1K entries : 1K entries
MicroCode Name : Ipv4-V6-Vrf : Ipv4-V6-Vrf
-- Line card 1 - per Port Pipe --
CamSize : 18-Meg
: Current Settings : Next Boot
Profile Name : ipv4-v6-vrf : ipv4-v6-vrf
L2FIB : 32K entries : 32K entries
L2ACL : 3K entries : 3K entries
IPv4FIB : 64K entries : 64K entries
IPv4ACL : 1K entries : 1K entries
IPv4Flow : 12K entries : 12K entries
EgL2ACL : 1K entries : 1K entries
EgIPv4ACL : 11K entries : 11K entries
Reserved : 2K entries : 2K entries
IPv6FIB : 18K entries : 18K entries
IPv6ACL : 4K entries : 4K entries
IPv6Flow : 3K entries : 3K entries
EgIPv6ACL : 1K entries : 1K entries
MicroCode Name : Ipv4-V6-Vrf : Ipv4-V6-Vrf
FTOS(conf)#
Must reload the system after
setting the CAM Profile
cam-profile ipv4-vrf
Set the VRF CAM profile for IPv4 only.