Dell Force10 TeraScale E Series - Page 1473

Virtual Routing and Forwarding (VRF) | 1473
show ip vrf
e
Display the interfaces assigned to VRF instances.
Syntax
show ip vrf [vrf-name]
Parameters
Command Modes
EXEC
Command
History
Example
show run vrf
e
View information about the current running VRF instances.
Syntax
show run vrf [vrf-name]
Parameters
Command Modes
EXEC
Command
History
Example
vrf-name
Enter the name of a non-default VRF instance. To display information on all VRF
instances (including the default VRF 0), do not enter a value.
Version 8.2.1.0 Introduced on the E-Series
FTOS#show ip vrf
VRF-Name VRF-ID Interfaces
default-vrf 0 So 0/0 So 0/1 So 0/2 So 0/3 Gi 1/0 Gi 1/1
Gi 1/2 Gi 1/3 Gi 1/4 Gi 1/6 Gi 1/7 Gi 1/8 Gi 1/9 Gi 1/11 Gi 1/12 Gi 1/13 Gi 1/14
Gi 1/15 Gi 1/16 Gi 1/17 Gi 1/18 Gi 1/19 Gi 1/20 Gi 1/21 Gi 1/22 Gi 1/23 Gi 1/24 Gi
1/25 Gi 1/26 Gi 1/27 Gi 1/28 Gi 1/29 Gi 1/30 Gi 1/31 Gi 1/32 Gi 1/33 Gi 1/34 Gi 1/
35 Gi 1/36 Gi 1/37 Gi 1/38 Gi 1/39 Gi 1/40 Gi 1/41 Gi 1/42 Gi 1/43 Gi 1/44 Gi 1/45
Gi 1/46 Gi 1/47 Ma 0/0 Ma 1/0 Nu 0 Vl 1 Vl 100 Vl 111 Vl 112
East 1 Gi 1/10
North 2 Gi 1/5
West 3
vrf-name
Enter the name of the VRF instance you want to view.
<CR> displays information on the default-vrf.
Version 8.2.1.0 Introduced on the E-Series
FTOS#show run vrf
!
ip vrf default-vrf
start-vlan-id 32
!
ip vrf East
start-vlan-id 1
!
ip vrf North
!
ip vrf West
start-vlan-id 96
FTOS#