Dell Force10 TeraScale E Series - Page 1504

1504 | C-Series Diagnostics and Debugging
www.dell.com | support.dell.com
Example
Figure 64-5. show hardware drops Command Example
The figure below shows the command to display dropped packers per unit, in other words, dropped
packets for a particular FP or CSF ASIC.
Figure 64-6. show hardware drops unit Command Example
The figure below shows the command to display dropped packets for a particular port on a unit.
FTOS#show hardware rpm 0 drops
UNIT No: 0
Total Ingress Drops :0
Total IngMac Drops :0
Total Mmu Drops :0
Total EgMac Drops :0
Total Egress Drops :0
UNIT No: 1
Total Ingress Drops :0
Total IngMac Drops :0
Total Mmu Drops :0
Total EgMac Drops :0
Total Egress Drops :0
UNIT No: 2
Total Ingress Drops :0
Total IngMac Drops :0
Total Mmu Drops :0
Total EgMac Drops :0
Total Egress Drops :0
UNIT No: 3
Total Ingress Drops :0
Total IngMac Drops :0
Total Mmu Drops :0
Total EgMac Drops :0
Total Egress Drops :0
FTOS#show hardware rpm 0 drops unit 0
Port# :Ingress Drops :IngMac Drops :Total Mmu Drops :EgMac Drops :Egress
Drops
1 0 0 0 0 0
2 0 0 0 0 0
3 0 0 0 0 0
4 0 0 0 0 0
5 0 0 0 0 0
6 0 0 0 0 0
7 0 0 0 0 0
8 0 0 0 0 0