Dell Force10 TeraScale E Series - Page 1590

1590 | S-Series Debugging and Diagnostics
www.dell.com | support.dell.com
show hardware system-flow
s
Display Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.
Syntax
show hardware system-flow layer2 stack-unit 0-7 port-set 0-1 [counters]
Parameters
Defaults
No default behavior
Command Modes
EXEC Privilege
Command
History
Example 1
Figure 66-9. show hardware system-flow layer2 counters Command Example
acl | qos For the selected stack member and stack member port-pipe, display which
system flow entry the packet hits and what queue the packet takes as it dumps
the raw system flow tables.
stack-unit 0-7 Enter the keyword stack-unit followed by 0 to 7 to select a stack member ID.
port-set 0-1
[counters]
Enter the keyword port-set with a port-pipe number — 0 or 1. The S25 models of
the S-Series have only port-pipe 0.
(OPTIONAL) Enter the keyword
counters to display hit counters for the selected
ACL or QoS option.
Version 7.8.1.0 Introduced on S-Series
FTOS#show hardware system-flow layer2 stack-unit 0 port-set 0 counters
---------------------------------------------------------------------------
EntryId Description #HITS
---------------------------------------------------------------------------
2048 STP BPDU Redirects 0
2047 LLDP BPDU Redirects 0
2045 LACP traffic Redirects 0
2044 GVRP traffic Redirects 0
2043 ARP Reply Redirects 0
2042 802.1x frames Redirects 0
2041 VRRP frames Redirects 0
2040 GRAT ARP 0
2039 DROP Cases 0
2038 OSPF1 STUB 0
2037 OSPF2 STUB 0
2036 VRRP STUB 0
2035 L2_DST_HIT+BC MAC+VLAN 4095 0
2034 L2_DST_HIT+BC MAC 0
2033 Catch all 0
384 OSPF[224.0.0.5] Packets 0
383 OSPF[224.0.0.6] Packets 0
382 VRRP Packets 0
380 BCast L2_DST_HIT on VLAN 4095 0
379 BCAST L2_DST_HIT Packets 0
4 Unknown L2MC Packets 0
3 L2DLF Packets 0
2 L2UCAST Packets 0
1 L2BCASTPackets 0
25
FTOS#