Dell Force10 TeraScale E Series - Page 178

178 | 802.3ah
www.dell.com | support.dell.com
clear ethernet oam statistics
s
Clear Link Layer OAM statistics.
Syntax clear ethernet oam statistics interface interface
Parameters
Parameters
None
Defaults
None
Command Mode
EXEC Privilege
Command
History
ethernet oam (enable/disable)
s
Enable Ethernet OAM.
Syntax
ethernet oam
Parameters
None
Defaults
Disabled
Command Mode
INTERFACE
Command
History
ethernet oam (parameters)
s
Specify a the maximum or minimum number of OAMPDUs to be sent per second.
Syntax
ethernet oam
{max-rate value | min-rate value}
Parameters
Defaults
10
Command Mode
INTERFACE
Command
History
interface Enter the interface for which you want to clear statistics, for example gig 0/1.
Version 8.4.1.0 Introduced on S-Series
Version 8.4.1.0 Introduced on S-Series
max-rate value |
min-rate value
Enter a maximum or minimum rate in OAMPDU/second.
Range: 1-10
Version 8.4.1.0 Introduced on S-Series