Dell Force10 TeraScale E Series - Page 320

320 | Border Gateway Protocol IPv4 (BGPv4)
www.dell.com | support.dell.com
bgp asnotation
c e s
Enables you to implement a method for AS Number representation in the CLI.
Syntax
bgp asnotation [asplain | asdot+ | asdot]
To disable a dot or dot+ representation and return to ASPLAIN, enter no bgp asnotation.
Defaults
asplain
Command Modes
ROUTER BGP
Usage
Information
You must enable bgp four-octet-as-support before enabling this feature. If you disable
four-octet-support after using dot or dot+ format, the AS Numbers revert to asplain text.
When you apply an asnotation, it is reflected in the running-configuration. If you change the notation
type, the running-config is updated dynamically and the new notation is shown.
Related
Commands
Command
History
Example
Figure 12-1. Dynamic changes of the bgp asnotation command in the running config
bgp four-octet-as-support Enable 4-Byte support for the BGP process
Version 8.3.1.0 Introduced Dynamic Application of AS Notation changes
Version 8.2.1.0 Introduced
(conf)#router bgp 1
(conf-router_bgp)#bgp asnotation asdot
(conf-router_bgp)#ex
(conf)#do show run | grep bgp
router bgp 1
bgp four-octet-as-support
bgp asnotation asdot
(conf)#router bgp 1
(conf-router_bgp)#bgp asnotation asdot+
(conf-router_bgp)#ex
(conf)#do show run | grep bgp
router bgp 1
bgp four-octet-as-support
bgp asnotation asdot+
(conf)#router bgp 1
(conf-router_bgp)#bgp asnotation asplain
(conf-router_bgp)#ex
(conf)#do show run |grep bgp
router bgp 1
bgp four-octet-as-support
(conf)#