Dell Force10 TeraScale E Series - Page 41

File Management | 41
rename
ces
Rename a file in the local file system.
Syntax
rename url url
Parameters
Command Modes
EXEC Privilege
Command
History
show boot system
c e
Displays information about boot images currently configured on the system.
Syntax
show boot system {all | linecard [slot | all] | rpm}
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Command
History
url
Enter the following keywords and a filename:
• For a file on the internal Flash, enter
flash:// followed by the filename.
• For a file on the external Flash, enter
slot0:// followed by the filename.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series original Command
all
Enter this keyword to display boot image information for all linecards and
RPMs.
linecard
Enter this keyword to display boot image information for the specified line
card(s) on the system.
rpm
Enter this keyword to display boot image information for all RPMs on the
system.
Version 7.7.1.0 Introduced on C-Series and E-Series