Dell Force10 TeraScale E Series - Page 412

412 | Border Gateway Protocol IPv4 (BGPv4)
www.dell.com | support.dell.com
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
show ip bgp inconsistent-as
c e
t
s
View routes with inconsistent originating Autonomous System (AS) numbers, that is, prefixes that are
announced from the same neighbor AS but with a different AS-Path.
Syntax
show ip bgp ipv4 multicast inconsistent-as
Command Modes
EXEC
EXEC Privilege
Command
History
ip-address
(OPTIONAL) Enter the IP address (in dotted decimal format) of the BGP
network to view information only on that network.
mask
(OPTIONAL) Enter the network mask (in slash prefix (/x) format) of the
BGP network address.
filter-list as-path-name (OPTIONAL) Enter the keyword filter-list followed by the name of a
configured AS-PATH ACL.
regexp
regular-expression
Enter a regular expression then use one or a combination of the following
characters to match:
• . = (period) any single character (including a white space)
•
* = (asterisk) the sequences in a pattern (0 or more sequences)
• + = (plus) the sequences in a pattern (1 or more sequences)
• ? = (question mark) sequences in a pattern (either 0 or 1 sequences). You
must enter an escape sequence (CTRL+v) prior to entering the ?
regular expression.
• [ ] = (brackets) a range of single-character patterns.
• ( ) = (parenthesis) groups a series of pattern elements to a single element
• { } = (braces) minimum and the maximum match count
• ^ = (caret) the beginning of the input string. If the caret is used at the
beginning of a sequence or range, it matches on everything BUT the
characters specified.
• $ = (dollar sign) the end of the output string.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
Version 7.6.1.0 Introduced IPv6 MGBP support for E-Series
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series