Border Gateway Protocol IPv4 (BGPv4) | 427
Example
Figure 12-36. Command Example: show ip extcommunity-list
Command
History
show running-config extcommunity-list
c e s
Use this feature to display the current configuration of the extended community lists.
Syntax
show running-config extcommunity-list [word]
Parameters
Defaults
No default values or behavior
Command Modes
EXEC Privilege
Example
Figure 12-37. Command Example: show running-config extcommunity-list
Command
History
#show ip extcommunity-list test
ip extcommunity-list test
deny RT:1234:12
permit regexp 123
deny regexp 234
deny regexp 123
#
Version 7.8.1.0 Introduced on S-Series
Version 7.7.1.0 Introduced on C-Series
Version 7.6.1.0 Introduced on E-Series
word
Enter the name of the extended community list you want to view.
#show running-config extcommunity-list test
ip extcommunity-list test
permit rt 65033:200
deny soo 101.11.11.2:23
permit rt as4 110212:340
deny regex ^(65001_)$
#
Version 7.8.1.0 Introduced on S-Series
Version 7.7.1.0 Introduced on C-Series
Version 7.6.1.0 Introduced on E-Series
To Next Page
Loading...
