Dell Force10 TeraScale E Series - Page 50

50 | File Management
www.dell.com | support.dell.com
Command output example: show sfm all
show startup-config
c e s
Display the startup configuration.
Syntax
show startup-config
Command Modes
EXEC Privilege
Command
History
Example
Command output example (partial): show startup-config
Related
Commands
show version
c e s
Display the current FTOS version information on the system.
Syntax
show version
Command Modes
EXEC Privilege
FTOS#show sfm all
Switch Fabric State: up
-- Switch Fabric Modules --
Slot Status
---------------------------------------------------------------------------
0 active
1 active
2 active
3 active
4 active
5 active
6 active
7 active
8 active
FTOS#
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
Version 7.4.1.0 Expanded to include last configuration change and start-up last updated (date and time)
and who made the change.
FTOS#show startup-config
! Version 7.4.1.0
! Last configuration change at Thu Mar 29 02:16:07 2007 by default
! Startup-config last updated at Thu Mar 29 02:35:08 2007 by default
!
boot system rpm0 primary flash://FTOS-EF-7.4.1.0.bin
boot system rpm0 secondary flash://FTOS-EF-6.3.1.2.bin
boot system rpm0 default flash://FTOS-EF-6.5.1.8.bin
!
...
show running-config Display current (running) configuration.