58 | File Management
www.dell.com | support.dell.com
Defaults
None.
Command Mode
EXEC Privilege
Command
History
Example
Command example: upgrade fpga-image
Usage
Information
Reset the card using the power-cycle option after restoring the FPGA command.
Related
Commands
system-fpga (OPTIONAL) Enter system-fpga to upgrade only the system FPGA on a
fiber linecard. Contact the Dell Force10 TAC before using this keyword.
link-fpga (OPTIONAL) Enter link-fpga to upgrade only the link FPGA on a fiber
linecard. Contact the Dell Force10 TAC before using this keyword.
booted
Upgrade the FPGA image using the currently running FTOS image.
file-url
Enter the following location keywords and information to upgrade the
FPGA using an FTOS image other than the one currently running:
• To specify an FTOS image on the internal flash, enter
flash://
file-path/filename.
• To specify an FTOS image on an FTP server, enter
ftp://
user:password@hostip/filepath
• To specify an FTOS image on the external flash on the primary RPM,
slot0://file-path/filename
• To copy a file on a TFTP server, enter tftp://hostip/filepath/
filename
Version 7.7.1.0
Renamed the
primary-fpga-flash keyword to fpga-image. Added support for
upgrading using a remote FTOS image.
Version 7.6.1.0
Added support for the all keyword
Version 7.5.1.0 Introduced on C-Series
FTOS#conf
Force10(conf)# upgrade primary-fpga-flash rpm
Proceed to upgrade primary fpga flash for rpm 0 [confirm yes/no]: yes
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
FTOS#
reset
Reset a line card or RPM.
restore fpga-image
This command copies the backup FPGA image to the primary FPGA image.
To Next Page
Loading...
