Dell Force10 TeraScale E Series - Page 705

IPv6 Access Control Lists (IPv6 ACLs) | 705
show cam-acl
c e s
Show space allocated for IPv6 ACLs.
Syntax
show cam-acl
Command Modes
EXEC
EXEC Privileged
Command
History
Related
Commands
Examples
Figure 25-3. Command Example: show cam-acl (default profile)
Figure 25-4. Command Example: show cam-acl (manually set profiles)
Version 8.4.2.1 Introduced on the S-Series
Version 8.4.2.0 Introduced on the E-Series TeraScale
Version 7.8.1.0 Introduced on the C-Series
cam-acl Configure CAM profiles to support IPv6 ACLs
FTOS#show cam-acl
-- Chassis Cam ACL --
Current Settings(in block sizes)
L2Acl : 5
Ipv4Acl : 6
Ipv6Acl : 0
Ipv4Qos : 1
L2Qos : 1
-- Line card 4 --
Current Settings(in block sizes)
L2Acl : 5
Ipv4Acl : 6
Ipv6Acl : 0
Ipv4Qos : 1
L2Qos : 1
FTOS#show cam-acl
FTOS#show cam-acl
-- Chassis Cam ACL --
Current Settings(in block sizes)
L2Acl : 2
Ipv4Acl : 2
Ipv6Acl : 4
Ipv4Qos : 2
L2Qos : 3
-- Line card 4 --
Current Settings(in block sizes)
L2Acl : 2
Ipv4Acl : 2
Ipv6Acl : 4
Ipv4Qos : 2
L2Qos : 3
FTOS#show cam-acl