IPv6 Basics | 721
Example
Figure 26-2. Command Example: ipv6 route
Usage
Information
When the interface goes down, FTOS withdraws the route. The route is re-installed, by FTOS, when
the interface comes back up. When a recursive resolution is “broken,” FTOS withdraws the route. The
route is re-installed, by FTOS, when the recursive resolution is satisfied.
Related
Commands
FTOS(conf)#ipv6 route 44::0 /64 33::1 ?
<1-255> Distance metric for this route
permanent Permanent route
tag Set tag for this route
FTOS(conf)#ipv6 route 55::0 /64 ?
X:X:X:X::X Forwarding router's address
gigabitethernet Gigabit Ethernet interface
loopback Loopback interface
null Null interface
port-channel Port channel interface
sonet Sonet interface
tenGigabitethernet TenGigabit Ethernet interface
vlan VLAN interface
FTOS(conf)#ipv6 route 55::0 /64 gigabitethernet 9/0 ?
<1-255> Distance metric for this route
X:X:X:X::X Forwarding router's address
permanent Permanent route
tag Set tag for this route
FTOS(conf)#ipv6 route 55::0 /64 gigabitethernet 9/0 66::1 ?
<1-255> Distance metric for this route
permanent Permanent route
tag Set tag for this route
FTOS#
show ipv6 route View the IPv6 configured routes.
To Next Page