Dell Force10 TeraScale E Series - Page 855

Intermediate System to Intermediate System (IS-IS) | 855
Example
Figure 28-5. Command Example: show isis graceful-restart detail
show isis hostname
e
Display IS-IS host names configured or learned on the E-Series.
Syntax
show isis hostname
Command Modes
EXEC
EXEC Privilege
Example
Figure 28-6. Command Example: show isis hostname
show isis interface
e
Display detailed IS-IS interface status and configuration information.
Syntax
show isis interface [interface]
FTOS#show isis graceful-restart detail
Configured Timer Value
======================
Graceful Restart : Enabled
T3 Timer : Manual
T3 Timeout Value : 30
T2 Timeout Value : 30 (level-1), 30 (level-2)
T1 Timeout Value : 5, retry count: 1
Adjacency wait time : 30
Operational Timer Value
======================
Current Mode/State : Normal/RUNNING
T3 Time left : 0
T2 Time left : 0 (level-1), 0 (level-2)
Restart ACK rcv count : 0 (level-1), 0 (level-2)
Restart Req rcv count : 0 (level-1), 0 (level-2)
Suppress Adj rcv count : 0 (level-1), 0 (level-2)
Restart CSNP rcv count : 0 (level-1), 0 (level-2)
Database Sync count : 0 (level-1), 0 (level-2)
FTOS#
FTOS#show isis hostname
System Id Dynamic Name Static Name
*F100.E120.0013 FTOS ISIS
FTOS#