Control and Monitoring | 87
ftp-server username
c e s
Create a user name and associated password for incoming FTP server sessions.
Syntax
ftp-server username username password [encryption-type] password
Parameters
Defaults
Not enabled.
Command Modes
CONFIGURATION
Command
History
hostname
c e s
Set the host name of the system.
Syntax
hostname name
Parameters
Defaults
FTOS
Command Modes
CONFIGURATION
Command
History
Usage
Information
The hostname is used in the prompt.
username
Enter a text string up to 40 characters long as the user name.
password password Enter the keyword password followed by a string up to 40 characters long as
the password.
Without specifying an encryption type, the password is unencrypted.
encryption-type (OPTIONAL) After the keyword password enter one of the following
numbers:
• 0 (zero) for an unecrypted (clear text) password
• 7 (seven) for hidden text password.
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series original Command
name
Enter a text string, up to 32 characters long.
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series original Command
To Next Page
Loading...
