EasyManua.ls Logo

Dell Force10 TeraScale E Series - Page 881

Dell Force10 TeraScale E Series
1640 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Layer 2 | 881
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 30-5. show mac-address-table Command Example
interface interface (OPTIONAL) Enter the keyword interface followed by the interface type,
slot and port information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a Port Channel interface, enter the keyword
port-channel
followed by a number:
C-Series and S-Series Range: 1-128
E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to
512 for ExaScale.
• For a SONET interface, enter the keyword
sonet followed by the slot/
port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
interface interface-type (OPTIONAL) Instead of entering the keyword interface followed by the
interface type, slot and port information, as above, you can enter the
interface type, followed by just a slot number.
vlan vlan-id (OPTIONAL) Enter the keyword vlan followed by the VLAN ID to display
the MAC address assigned to the VLAN.
Range: 1 to 4094.
count (OPTIONAL) Enter the keyword count, followed optionally, by an
interface or VLAN ID, to display total or interface-specific static addresses,
dynamic addresses, and MAC addresses in use.
Version 8.4.2.3 Added support for sticky-MAC learned addresses on the C-Series and S-Series.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series
Table 30-1. show mac-address-table Information
Column Heading Description
VlanId Displays the VLAN ID number.
Mac Address Displays the MAC address in nn:nn:nn:nn:nn:nn format.
Type Lists whether the MAC address was manually configured (Static), learned dynamically
(Dynamic), or learned on a port configured for sticky-MAC learning (Sticky).
FTOS#show mac-address-table
VlanId Mac Address Type Interface State
999 00:00:00:00:00:19 Dynamic Gi 0/1 Active
999 00:00:00:00:00:29 Dynamic Gi 0/2 Active
10 00:00:00:11:11:11 Sticky Gi 0/3 Active
FTOS#

Table of Contents