Dell Force10 TeraScale E Series - Page 886

886 | Layer 2
www.dell.com | support.dell.com
Command Modes
EXEC
EXEC Privilege
Command
History
Example
E-Series output:
FTOS#show mac learning-limit
Interface Vlan Learning Dynamic Static Unknown SA
Slot/port Id Limit MAC count MAC count Drops
Gi 5/84 2 2 0 0 0
Gi 5/84 * 5 0 0 0
Gi 5/85 3 3 0 0 0
Gi 5/85 * 10 0 0 0
FTOS#show mac learning-limit interface gig 5/84
Interface Vlan Learning Dynamic Static Unknown SA
Slot/port Id Limit MAC count MAC count Drops
Gi 5/84 2 2 0 0 0
Gi 5/84 * 5 0 0 0
FTOS#show mac learning-limit interface gig 5/84 vlan 2
Interface Vlan Learning Dynamic Static Unknown SA
Slot/port Id Limit MAC count MAC count Drops
Gi 5/84 2 2 0 0 0
Example
C-Series/S-Series output:
FTOS#show mac learning-limit
Interface Learning Dynamic Static Unknown SA
Slot/port Limit MAC count MAC count Drops
Gi 1/0 10 0 0 0
Gi 1/1 5 0 0 0
FTOS#show mac learning-limit interface gig 1/0
Interface Learning Dynamic Static Unknown SA
Slot/port Limit MAC count MAC count Drops
Gi 1/0 10 0 0 0
interface interface (OPTIONAL) Enter the keyword interface with the following keywords
and slot/port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For SONET interfaces, enter the keyword
sonet followed by the slot/
port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
• For a Port Channel interface, enter the keyword
port-channel
followed by a number:
C-Series Range: 1-128
E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to
512 for ExaScale.
vlan vlan-id On the E-Series, enter the keyword vlan followed by the VLAN ID.
Range: 1-4094
Version 8.3.1.0
Added
vlan option on E-Series.
Version 7.7.1.0 Introduced on C-Series
Version 7.5.1.0
Added support for
violate-action and detail options
Version 6.5.1.0 Added support for Port Channel