Dell Force10 TeraScale E Series - Page 990

990 | Object Tracking
www.dell.com | support.dell.com
show track
c e s
Display information about tracked objects, including configuration, current tracked state (UP or
DOWN), and the clients which are tracking an object.
Syntax
show track [object-id [brief] | interface [brief] [vrf vrf-name] | ip route [brief] [vrf vrf-name]
| resolution | vrf vrf-name [brief] | brief]
Parameters
Command Modes
EXEC Privilege
Command
History
Related
Commands
object-id
(OPTIONAL) Display information on the specified tracked object.
Range: 1 to 65535.
interface
(OPTIONAL) Display information on all tracked interfaces (Layer 2 and IPv4 Layer 3).
ip route
(OPTIONAL) Display information on all tracked IPv4 routes.
resolution
(OPTIONAL) Display information on the configured resolution values used to scale
protocol-specific route metrics to the range 0 to 255.
brief
(OPTIONAL) Display a single line summary of the tracking information for a specified
object, object type, or all tracked objects.
vrf vrf-name
(OPTIONAL) E-Series only: Display information on only the tracked objects that are
members of the specified VRF instance. Maximum: 32 characters.
If you do not enter a VRF name, information on the tracked objects from all VRFs is
displayed.
Version 8.4.1.0 Introduced
show running-config track Display configuration information about tracked objects.
track interface ip routing Configure object tracking on the routing status of an IPv4 Layer 3
interface.
track interface line-protocol Configure object tracking on the line-protocol state of a Layer 2 interface.
track ip route metric threshold Configure object tracking on the threshold of an IPv4 route metric.
track ip route reachability Configure object tracking on the reachability of an IPv4 route.