Dell PowerEdge C6320 - Page 75

CAUTION: This removal and installation procedure is only for 2.5-inch SSD. Installing a 2.5-inch
hard disk drive into the adapter can cause performance issue.
Follow the safety guidelines listed in the Safety instructions section.
Steps
1. Place the 2.5-inch SSD into the 2.5-inch adapter bracket.
2. Secure the 2.5-inch SSD to the 2.5-inch adapter bracket with M3 screws.
Figure 25. Removing and installing a 2.5-inch SSD from the 2.5-inch adapter bracket
1. 2.5-inch SSD 2. M3 screw (2)
3. 2.5-inch adapter
3. Place the adapter assembly into the 3.5-inch hard drive carrier.
4. Secure the adapter assembly to the 3.5-inch hard drive carrier with screws.
75