Dell PowerVault MD3220 - Changing the RAID Level of a Disk Group

122 Script Commands
Clear Virtual Disk Reservations
This command clears persistent virtual disk reservations.
Syntax
clear (allVirtualDisks | virtualDisk
[virtualDiskName] | virtualDisks [virtualDiskName1
... virtualDiskNamen]) reservations
Parameters
NOTE: You can use any combination of alphanumeric characters, hyphens, and
underscores for the names. Command names can have a maximum of 30
characters. If you exceed the maximum character limit, replace square brackets
([ ]) with angle brackets (< >) to overcome this limitation.
Clear Virtual Disk Unreadable Sectors
This command clears the unreadable sector information from one or more
virtual disks.
Syntax
clear (allVirtualDisks | virtualDisk
[virtualDiskName] | virtualDisks [virtualDiskName1
... virtualDiskNameN]) unreadableSectors
Parameter Description
allVirtualDisks Clears reservations on all virtual disks in
the storage array.
virtualDisk or virtualDisks Name of the specific virtual disk for which
to clear reservations. You can enter more
than one virtual disk name. You must put
brackets ([ ]) around the virtual disk name.
If the virtual disk name has special
characters, you must also put quotation
marks (" ") around the virtual disk name.
book.book Page 122 Friday, March 4, 2011 10:45 AM